SEI Industries 1518-3542 Service Manual Download Page 50

Page: 50 / 118

Section 7: Valve Maintenance

MAX Valve Repair and Replacement

2016 Bambi MAX Service Manual

–

Models 1518-3542

(Version E)

We Engineer Solutions

Changing the Guide Bushings

To change the guide bushings, follow the
steps listed below.

Open the valve about half way.

Remove the two bolts holding
the old bushings in place and
remove the old bushings.

Place the new bushing into
position.

Insert the bolts, attach the nuts
and tighten.

Run the valve up and down. If
any slowing of the valve
movement or jamming is noticed, loosen the bolts on one bushing and pull the valve body away
from the center of the valve and re-tighten the bolts.

If slowing or jamming still occurs, loosen the guide bushing bolts on the opposite side and repeat
the operations of step 5.

The valve should be opened and closed several times. If it operates as it should, the bushings are
changed correctly.

Summary of Contents for 1518-3542























































































































Search results

Summary of Contents for 1518-3542

Reviews:

Related manuals for 1518-3542

Brands by name

Popular brands

SEI Industries 1518-3542, Service Manual

Search results

Summary of Contents for 1518-3542

Reviews:

Related manuals for 1518-3542

Brands by name

Popular brands