82
CHAPTER 8
ASCII command interface
#SELMODULE
This command is used to select one or more modules on a Flasher ATE system. The module
numbers are separated by a comma. If all modules shall be selected, the keyword “all” can
be used (
#SELMODULE ALL
) instead of a list with all module numbers.
Command structure:
#SELMODULE [module1][,module2][,module3]
Example sequence:
Command send to
the Flasher ATE
Reply on the main channel
(RS232 or telnet connection)
Reply on the target
channel (telnet connection
to flash module)
#SELMODULE 1,2,3
#ACK
#SELECTED:1,2,3
Flasher ATE User Guide (UM08035)
© 2017-2018 SEGGER Microcontroller GmbH
