30
CHAPTER 3
Setting up Flasher ATE for remote-controlled
mode
3.1 Setting up Flasher ATE for remote-controlled
mode
In order to set up the Flasher ATE for the remote-controlled mode it needs to be configured
once using the J-Flash software. For more information about J-Flash, please refer to the
J-Flash User Guide
.
After starting J-Flash, open the appropriate J-Flash project for the target the Flasher ATE
shall be configured for, by selecting
File
->
Open Project
. If J-Flash does not come with
an appropriate sample project for the desired hardware, a new project needs to be created
by selecting File ->
File
->
New Project
.
After the appropriate project has been opened / created, the data file which shall be pro-
grammed needs to be loaded, by selecting
File
->
Open
. After this J-Flash should look
like in the screenshot below.
Flasher ATE User Guide (UM08035)
© 2017-2018 SEGGER Microcontroller GmbH
