64
CHAPTER 8
ASCII command interface
8.3.6.1.3 Command #AUTO PATCH
The
#AUTO PATCH
command allows patching of the content of the data to be programmed.
Flasher ATE responds with
•
#OK
if no error occurred
•
#ERRxxx
if any error occurred during operation.
xxx
represents the error code, normally
replied to Flasher PC program. The
#ERRxxx
message may be followed by an additional
error text.
For further information about the usage of the
#AUTO PATCH
command please refer to
Patch
file support
on page 50.
Example sequence:
Command send to
the Flasher ATE
Reply on the main channel
(RS232 or telnet connection)
Reply on the target
channel (telnet connection
to flash module)
#AUTO PATCH 1
1,0,8:0011223344556677
#ACK
#STATUS:INITIALIZING
#STATUS:CONNECTING
#STATUS:UNLOCKING
#STATUS:ERASING
#STATUS:PROGRAMMING
#STATUS:VERIFYING
#OK (Total 13.993s,
Erase 0.483s, Prog
9.183s, Verify 2.514s)
#STATUS:READY
#RESULT:1:OK (Total
13.993s, Erase 0.483s,
Prog 9.183s, Verify
2.514s)
Flasher ATE User Guide (UM08035)
© 2017-2018 SEGGER Microcontroller GmbH
