− 61 −
３−４ ERROR MESSAGES
If this product detects any fault, the screen stops and an error message is displayed.
Read the content of the error message and, referring to the items below, take the appropriate
countermeasure.
DISPLAY
WCCF CONTROL CLOSED
NORMALLY.
WCCF CONTROL LARGE
SOCKET RECEIVE ERROR.
WCCF CONTROL SOCKET
RECEIVE ERROR.
WCCF CONTROL SOCKET
SEND ERROR.
NOT EXIST DIMM BOARD.
NOT REACT DIMM
BOARD.
CAN'T CONNECT TO
WCCF CONTROL
PROCESS.
CAN'T CONNECT TO
WCCF CONTROL
PROCESS. (LARGE DATA)
SATELLITE
ARRANGEMENT IS
ILLEGAL.
SATELLITE POSITION IS
ILLEGAL.
Error occurred during match.
Please call staff.
ERROR 31
THIS GAME IS NOT
ACCEPTABLE BY MAIN
BOARD.
CAUSE
Normal termination of
application on the PC side, or
communication error
Faulty connection between
DIMM board and NAOMI
board, or DIMM board fault
Abnormal termination of
application on the PC side
Satellites are not in a unified
arrangement.
Duplication exists in the
satellite information.
Communication error
Game data transmitted from
the PC to the DIMM board
was broken.
COUNTERMEASURES
・The message is displayed on the satellite
when only the main unit's power supply is
turned off. (Normal)
・If the message is displayed only on a
specific satellite, restart the satellite.
・If the message is displayed on several
satellites and on the main unit, restart the
main unit and all the satellites.
・Check the hub and the wiring between the
PC and the network if the fault occurs
often.
・Check the connections between the DIMM
board and NAOMI board.
・If there is no improvement, replace the
DIMM board.
・Restart the main unit and all the satellites.
・Check the PC if the fault occurs often.
Unify the arrangement of all the satellites in
test mode.
Clear any duplication in satellite information
in test mode.
・Press SW1 on the switch unit.
・Check the hub and the wiring between the
PC and the network if the fault occurs
often.
・Check the network connections.
・Check the network connections on the PC
side.
・First, restart the power of the main unit.
Then display the game on the main unit
screen. Finally, restart the satellite power.
・Make sure the correct security chip is
plugged in firmly.
・Check for abnormality in the battery inside
the DIMM board.
