− 38 −
② CAMERA BASIC SETTING
● When laying the test sheet down, make sure it is neither in the wrong
position nor wrong side up, is lying flat and is not folded or drifting
above the field surface.
● Do not move the test sheet until basic camera adjustments are
completed.
● The adjustments made on this screen involve no adaptation to ambient
light conditions.
● The test sheet is used for periodic inspections. Store it carefully to
prevent creasing.
It is possible to make camera adjustments for each component by selecting CAMERA BASIC
SETTING.
Always make such adjustments after replacing the ASSY CCD CASE (camera unit) or ASSY
LED L/R (LED unit).
Use the same procedures whenever readjustment is necessary after moving components or
checking the adjustment status.
Before executing Camera Basic Setting, lay the test sheet print correctly on the field sheet,
pattern side down, with the " ◎ " mark in the center and the " ○ " mark on the monitor side.
At this point, perform adjustments or remedial actions to ensure that all settings are correct.
If "NG" is displayed, check for connection faults or hardware damage.
Read Section 3 for details of adjustment procedures.
<<CAMERABASICSETTING>>
CommunicationOK
BootVersion1.000
BootChecksumOK
XXXXXXXX
ProgVersionXXXX
ProgChecksumOK
XXXXXXXX
IC3MemoryTestOK
IC4MemoryTestOK
CCDRegisterOK
ShutterTimeXXXX
BrightnessXXX
FocusXXX
CameraPositionOK
LIGHTBALANCE
CAMERAPOSITIONSETTING
CAMERASHUTTERAUTOSETTING
CAMERASHUTTERSAVE
->EXIT
SELECTWITHSERVICEBUTTON
ANDPRESSTESTBUTTON
Ⅰ
Ⅱ
Ⅲ
Ⅳ
FIG. 2. 6 c CAMERA BASIC SETTING csreen
↓
MONITOR SIDE
FIG. 2. 6 d Test Sheet
