− 30 −
２−３ GAME TEST MODE
Test mode for the game boards inside the main unit is necessary only
during setup.
Running test mode for the game boards inside the main unit is only necessary when adjusting
the projector during positioning and setup or in the event of trouble requiring game board
replacement.
The following procedure for main unit test mode provides a functional description but the
process should only be carried out by the site maintenance personnel or other qualified
professionals.
To test the main unit, put both sides into test mode at the same time.
If only one side of the main unit is put into test mode, the other side will display an error screen.
This is not a malfunction. (See 3-4.)
Select GAME TEST MODE from the System Menu screen to display the Game Test Menu
screen.
Use the SERVICE Button to move the cursor to the desired test item, and press the TEST
Button to select.
For the selected item, read the explanations below regarding operation.
The screen content will vary according to the main unit and satellite settings.
