5
3.
INSTALLATION AND SERVICE INSTRUCTIONS
·
Only QUALIFIED SERVICE PERSONNEL should carry out installation and
commissioning.
3.1. HANDLING AND INSTALLATION PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure
that the player can enjoy the game safely.
The game must NOT be installed under the following conditions:
·
Outside, the game is designed for indoor use only.
·
In areas directly exposed to sunlight, high humidity, dust, excessive heat, or extreme cold.
·
In locations that would present an obstacle in the case of an emergency i.e. near fire equipment or
emergency exits.
·
On unstable surfaces or surfaces subject to vibration.
·
Where liquids, other than routine cleaning, may come into contact with the game.
Important:
·
Only Qualified Service Personnel should install this machine.
·
Be sure to switch the supply power OFF and remove the mains supply plug from the machine before any
work is carried out on the machine.
·
Do not attempt to repair the PCB’s (Printed Circuit Boards) yourself. This will void the warranty. The
PCB’s contain static sensitive devices that could be damaged.
·
Always return a faulty part to your distributor with adequate packaging and protection.
·
When removing the plug from the mains always grasp the plug not the cable.
·
Do not use a fuse that does not meet the specified rating.
·
Make sure all connections are secure before applying power.
·
Ensure that the mains lead is not damaged. If the mains lead is damaged in any
way there could be a danger of electric shock or a fire hazard.
·
Ensure that the power supply is fitted with circuit protection. Using the power
supply without circuit protection is a fire hazard.
3.2. COIN
HANDLING
Standard Sega machines are fitted with a SR3 coin mechanism, however, as a service to our customers
Sega machines can be supplied with no coin mechanism or door allowing the customer to fit a coin handling
option from the approved list. Fit only the coin handling arrangements detailed below and follow the
instructions provided in section 3.8. Failure to fit the coin handling options detailed or failure to follow the
installation instructions will render the machine, under the CE marking directive, void.
Approved coin handling options:
·
Coin controls SR3
·
Generic mechanical
·
Mars (MS111B1 and ME115)
·
SECI RM4-G20
Summary of Contents for Virtua Cop 3 Deluxe Type
