Sega Virtua Cop 3 Deluxe Type Page 62 Service Manual Download

Page: 62 / 115

5.2.3. JVS TEST

JVS TEST is used to verify the specs of the I/O BOARD connected to the Chihiro and to run input tests.
I/O BOARD specs are displayed initially.
Screens may differ depending on the type of I/O BOARD connected to the unit.

(1) Use the SERVICE Button to move the cursor to the desired test item.

(2) Move the cursor to INPUT TEST and press the TEST Button to enter the INPUT TEST screen for the

I/O BOARD currently displayed.

(3) When 2 or more I/O BOARDS are connected, move the cursor to NEXT NODE and press the TEST

Button to enter the test screen for the next I/O BOARD. The lower the NODE number, the further away
the node is from the Chihiro.

(4) Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.

Summary of Contents for Virtua Cop 3 Deluxe Type




















































































































Search results

Summary of Contents for Virtua Cop 3 Deluxe Type

Reviews:

Related manuals for Virtua Cop 3 Deluxe Type

Brands by name

Popular brands

Sega Virtua Cop 3 Deluxe Type, Service Manual

Search results

Summary of Contents for Virtua Cop 3 Deluxe Type

Reviews:

Related manuals for Virtua Cop 3 Deluxe Type

Brands by name

Popular brands