Sega Virtua Cop 3 Deluxe Type, Service Manual

Page: 57 / 115

54
ITEM DESCRIPTION / REFERENCES INTERVAL
INSTALLATION OF
THE MACHINE When the machine is installed perform the following
checks:
· Check to see that each setting is as per the standard
settings input at the time of shipment. 3.9
·
In the INPUT TEST mode, check each switch. 3.9.3
· In the OUTPUT TEST mode, check each of the lamps.
3.9.4
· Test on-IC-Board IC's in the self-test mode. 5.2.1
Monthly
MEMORY ·
This test is automatically executed by selecting RAM
TEST, or ROM BOARD TEST in the Menu mode. 5.2
Monthly
PERIODIC CHECKS Periodically perform the following
· MEMORY TEST. 5.2
· Ascertain each setting.
·
In the INPUT TEST mode, test the control devices.
5.2.4
·
In the OUTPUT TEST mode, check each of the lamps.
5.3.2
Monthly
CONTROL SYSTEM
· In the INPUT TEST mode, check each switch and
·
Adjust or replace each switch and
Monthly
MONITOR
(Projector)
·
In the CRT TEST mode, check to ensure the monitor
(projector) is adjusted correctly. 5.2.6
· Clean screen - (switch off machine and remove the
plug). Do not use a water jet.
Monthly
Weekly
IC BOARD MEMORY TEST 5.2
·
In the SOUND TEST mode, check the sound related
ROMs. 5.2.5
Monthly
DATA CHECK · Check such data as held in the bookkeeping screens,
relating to number and length of plays. 5.2 & 5.3.5 Monthly
EXTERIOR
MAINTENANCE
· Clean surfaces
Monthly
COIN MECHANISM ·
Check switch operation (if fitted)
Monthly