Sega Virtua Cop 3 Deluxe Type, Service Manual

Page: 40 / 115

37
3.14.2.CONTROL UNIT (GUN CONTROLLER)
·
Follow these directions carefully to avoid damaging or losing small parts.
In the cases where the gun's operation is not satisfactory or the gun sight deviates from the direction in
which the control unit is pointed, the gun's interior parts may have been damaged. Replace the parts by
disassembling the gun using the following procedure.
Note: be sure to perform sighting check in the test mode when the gun parts are replaced.
3.14.2.1.REPLACING THE MICROSWITCH
To replace the Gun Controller's internal components, first separate the left shell (Cover L) and right shell
(Cover R). The controller's internal components are mounted on the right shell, so work with the gun lying on
its right side. To replace the Weapon Change Button microswitch, first remove the Weapon Change Button
from the right shell.
1. Turn power off.
2. Remove the 10 screws to separate the two shells.
3. With the right shell lying flat, carefully lift the
left shell from the right shell.
SCREW (10), black / M3 x 10, W/small flat &
spring washers