26
3.8.5. ADJACENT CONTROL INTERFERENCE PREVENTION
·
Be sure that the machine is not connected to the mains supply before
attempting this operation.
·
Be careful not to damage wiring.
·
The Game Board area should be accessed only if necessary.
·
Only QUALIFIED SERVICE PERSONNEL should carry out this operation
When games with the same or similar infrared sensing system are installed side by side, interference may
occur causing malfunction or inaccuracy of the sensing system in adjacent games.
A removable wire harness controls the operating frequency of the gun sense system. Removal of this
harness switches from the default frequency to an alternate one.
Where game machines of the same or similar type are installed side by side, remove the jumper harness
(SPY-60010UK) from every other machine in the line.
1.
Turn off the power.
2.
Remove the Game Board as detailed in section 3.13 of the Service Manual (the work can be
completed with the Game Board in place but access is limited).
3.
Locate the Sensor Board and remove SPY-60010UK WIRE HARNESS HIGH FREQUENCY
JUMPER as required.
Summary of Contents for Virtua Cop 3 Deluxe Type
