Error 37
DISPLAY
Verifying Game Program Failed.
CAUSE
The program image is unveri
fi
ed due to the program image not existing on the game disk or server.
COUNTERMEASURES
Check that the correct game disk is inserted.
Error 41
DISPLAY
Server
Not
Respond.
CAUSE
The server is not responding.
COUNTERMEASURES
Check the network settings. Set IP Address and other settings. Check that the network cable has not been pulled out.
Error 42
DISPLAY
Server
Mount
Failed
CAUSE
The server directory is could not be reached.
COUNTERMEASURES
Check the network settings. Set IP Address and other settings. Check that the network cable has not been pulled out.
Error 43
DISPLAY
IP
Address
Not
Assigned.
CAUSE
An IP Address could not be obtained from the DHCP server.
COUNTERMEASURES
Check the network settings. Set IP Address and other settings. Check that the network cable has not been pulled out.
Error 44
DISPLAY
Game Program Not Found on Server.
CAUSE
No program image on the network server.
COUNTERMEASURES
Check that the game title, place on the network server, and the key chip correspond to each other.
Caution 51
DISPLAY
Wrong
Resolution
Setting.
CAUSE
The game does not support the current resolution settings.
COUNTERMEASURES
Change the DIP SW to the correct settings and restart.
Caution 52
DISPLAY
Wrong
Horizontal/Vertical
Setting.
CAUSE
The monitor horizontal/vertical settings are incorrect.
COUNTERMEASURES
Change the DIP SW to the correct settings and restart.
14-3 REPLACING
THE
FUSE
Fuse replacements other than those speci
fi
ed can cause accidents and are strictly forbidden. In case fuse replacements other than those
stated in this manual are necessary, contact where you purchased the product from for inquiries regarding this matter.
To prevent accidents due to electrical shock, always turn the power off and disconnect the power plug from the power outlet before performing
any task that involves touching the interior of the product.
Be careful not to damage the wires. Damaged wires may cause electric shock, short circuit or present a risk of
fi
re.
Be sure to use fuses meeting the speci
fi
ed rating. Using fuses exceeding the speci
fi
ed rating can cause
fi
re and electric shock accidents.
After eliminating the cause of a blown fuse, replace the fuse.
Depending on the cause of the fuse blow, continued use with the blown fuse can cause generation of heat and present a risk of
fi
re.
The Control Unit (Gun) circuit fuses are found, from facing the cabinet, inside side door R on
the right side of the cabinet. There are four fuses arranged vertically on the control panel inside
side door R. From top to bottom these fuses are -
- Player 1 Control Unit (Gun) speed sensor fuse
- Player 2 Control Unit (Gun) speed sensor fuse
- Player 1 Control Unit (Gun) targeting sensor unit fuse
- Player 2 Control Unit (Gun) targeting sensor unit fuse
1) Turn the power off.
2) Remove the three truss screws on side door R.
3) Unlock and remove side door R.
4) Exchange the fuse.
SCREW (4), black
PHOTO 14.3a
PHOTO 14.3b
FUSE 0.2A, 250V
PHOTO 14.3c
45
