Con
fi
rm that the accessories listed in the table below are present when setting up the product. Accessories marked “Spare” in
the note column are consumable items but included as spares.
- OWNER’S MANUAL (1)
- WRENCH SET
T-25
TORX
10-24/10-32
T-15
TORX
8-32
T-40
TORX
5/16-18
T-27
TORX
1/4-20)
- DVD SOFTWARE KIT(1)
62”/52”DX
- OWNER’S MANUAL (1)
- WRENCH SET
- DVD SOFTWARE KIT (1)
29”STD
NOTE: When you order the DVD-ROM disc only, specify the part number 610-0726-0003 (DVD SOFT HDF).
DVD SOFTWARE KIT (1)
KEY CHIP (1)
DVD-ROM DISC (1)
CUSHION SPONGE
601-11137 (1)
DVD-ROM Disc Protector
NOTE: Do not use DVD SOFTWARE KIT when start operation because game software already installed when manufactured.
5. ACCESSORIES
6. ASSEMBLY AND INSTALLATION
Perform assembly work by following the procedure herein stated. Failure to comply with the instructions can cause electric shock.
Perform assembling as per this manual. Since this is a complex machine, incorrect assembling can cause an electric shock, machine damage
and/or improper functioning as per speci
fi
ed performance.
When assembling, be sure to use plural persons. Depending on the assembly work, there are some cases in which working by one person
alone can cause personal injury or parts damage.
Ensure that connectors are accurately connected. Incomplete connections can cause electric shock.
Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit or present a risk of
fi
re.
Do not carelessly push the projector. Pushing the projector carelessly can cause the projector to fall down.
This work should be carried out by the site maintenance personnel or other quali
fi
ed professionals. Performing work by non-technical per-
sonnel can cause a severe accident such as electric shock. Failing to comply with this instruction can cause a severe accident such as electric
shock to the player during operation.
Provide suf
fi
cient space so that assembling can be performed. Assembling in places that are narrow or have a low ceiling may cause dif-
fi
culty to perform the work and can cause an accident.
To perform work safely and avoid serious accidents such as the cabinet falling down, do not perform work in places where elevation differs,
a ditch, or slope exist.
Do not use this product with connectors other than those that were connected and used with the Game Board at the time of shipping. Do not
carelessly connect wires to connectors that were not used at the time of shipping, as this may cause overheating, smoke or
fi
re damage.
Handle molded parts with care. Excessive weight or pressure may cause them to break and the broken pieces may cause injury.
To perform work safely and securely, be sure to prepare a stepladder which is in a secure and stable condition. Performing work without
using the stepladder can cause accidents such as falling down.
Check the tags on the wire carefully before connecting the DVD wire connectors. Once you have the correct connector be sure to insert it in
the correct direction and angle. Attempting to force the incorrect connectors together or connecting them at the incorrect angle may
damage the connectors and create a
fi
re risk or risk of burns.
7
