Aim and
fi
re at the mark to the lower right. The mark to the lower right will disappear, and the
same mark will be displayed in the center.
(Press the TEST Button to return to the Gun Calibration Setting screen.)
Aim and
fi
re at the mark in the center.
“NOW CALCULATING” will be displayed in the center. The screen will automatically switch
to the following.
PLAYER 1 GUN ADJUSTMENT
PLEASE SHOOT GRID WITH PLAYER 1 GUN
PRESS TEST TO EXIT
-->
PLAYER 1 GUN ADJUSTMENT
NOW CALCULATING
PLAYER 1 GUN ADJUSTMENT
TEST
: TO MEMORIZE
SERVICE : TO CANCEL
PLAYER 1 GUN MARK CHECKING
+OUT OF SCREEN P1+
Point the Control Unit (Gun) at the screen and a gun mark will be dis-
played. Check to make sure that the gun can aim right up to the edges of
the frame.
If the calibration is correct press the TEST Button to save it.
If re-calibration is required press the SERVICE Button. The calibration
results will not be saved and you will return to the Gun Calibration Set-
ting screen.
“OUT OF SCREEN” is displayed when the gun cross is perceived to be
out of screen.
Refer to the following procedure when adjusting the sights.
- Line up the concave sight nearest you on the gun so that it is at the
height of the horizontal line of the “+” mark.
- Line up the convex sight at the tip of the gun so that it also lines up
with the horizontal line.
- Line up the centers of the tops of the concave and convex sights with
the center of the “+” and
fi
re.
d-3. PLAYER1 GUN DEFAULT ADJUSTMENT/PLAYER2 GUN DEFAULT ADJUSTMENT
This item adjusts the sight settings to those at the time of shipment. (This is the same for “PLAYER2 GUN DEFAULT ADJUSTMENT”.)
Select PLAYER1 GUN DEFAULT ADJUSTMENT on the Gun Calibration Setting screen and press the TEST Button.
Press the TEST Button to set the Control Unit (Gun) targeting to the pre-set default values.
When setting is complete the message “COMPLETED” will appear on the screen and it will then automatically proceed to the Gun Calibration Setting
screen.
If you wish to cancel this process, press the SERVICE Button. The screen will automatically proceed to the Gun Calibration Setting screen without altering
the settings for the gun.
PLAYER 1 GUN DEFAULT ADJUSTMENT
TEST
: TO SET DEFAULT
SERVICE : TO CANCEL
PLAYER 1 GUN DEFAULT ADJUSTMENT
COMPLETED
29
