After the game is joined and stabilized,
using two people, place the monitor on
top of the platform shown (Figure 5) with
the screen side of the monitor up against
the metal bracket
1
. The access hole
shown, is used for the line cord from the
monitor and the video cable that
connects the monitor to the game board.
When the monitor is on the platform
(Figure 6) feed the line cord and video
cable through the access hole. Connect
the line cord to the receptacle provided
on the filter board below and connect the
video harness to the appropriate
connector .When connecting the video
cable, use position RGB on the 52
monitor and HDMI 1 on the 62 monitor.
Next, assemble the three monitor side
protector brackets
2
as shown in Figure 7.
Add the weldment marquee support
3
.
When completed, slide the assembly
over the monitor with the flange of the
support facing the rear and secure the
assembly to the base bracket on the
pedestal using the four
1
/
4
-20 X
1
/
2
tamper proof bolts on each side (Figure
8).
Note: the appearance of the various
monitor brackets varies slightly from the
62 inch model to the 52 inch model
monitor.
Access Hole
Flange
Figure 5
1: Weldment, front monitor support
Part#: S254-032-000 (52"), S255-015-00 (62")
Figure 6
Figure 7
2-1: Bracket monitor retainer Left
Part#: S254-138-00L (52")
S255-105-00L (62")
2-2: Bracket monitor retainer Right
Part#: S254-138-00R (52")
S255-105-00R (62")
2-3: Weldment, monitor retainer cap
Part#: S254-042-000 (52")
S255-022-000 (62")
1/4-20 1/2" Tamper proof bolts (4)
3: Weldment, marquee support
Part#: S254-045-000 (52")
S255-026-000 (62")
Figure 8A
10