Sega SHOOT THIS WIN THIS Service Manual Download Page 31

Page: 31 / 93

EXPLANA

TION OF TEST

AND DA

DISPLA

EXPLANATION OF TEST AND DATA DISPLAY

Do not touch any parts that are not specified in these directions. Touching unspecified

locations may lead to electric shock or cause short circuits.

Be careful that a finger or hand does not get caught when opening/closing the coin

chute door.

• When you enter the Test Mode, fractional coin and bonus adder data is erased.
• Adjust the sound to the optimum volume, taking into consideration the

environmental requirements of the installation location.

• Removing the coin meter circuitry renders the game inoperable.

• The details of changes to Test Mode settings are saved when you exit from Test

Mode by selecting EXIT from the system Test Mode menu. Be careful because if the

power is turned off before that point, changes to the settings will be lost.

• Use with the specified settings. If settings other than those specified are used,

inappropriate operations or malfunction may occur.

Summary of Contents for SHOOT THIS WIN THIS






























































































Search results

Summary of Contents for SHOOT THIS WIN THIS

Reviews:

Related manuals for SHOOT THIS WIN THIS

Brands by name

Popular brands

Sega SHOOT THIS WIN THIS, Service Manual

Search results

Summary of Contents for SHOOT THIS WIN THIS

Reviews:

Related manuals for SHOOT THIS WIN THIS

Brands by name

Popular brands