Sega SHOOT THIS WIN THIS, Service Manual

Page: 64 / 93

COIN
HANDLING
59
12
�EACH and RUN
�he SR3 can have the option to enable �EACH & RUN on all 12 coins.
�he specific coin channel to be programmed is selected using switch 1
(�SB) to switch 4 (LSB) on the 6 wa� DIL switch.
Programming Steps
�o programme a coin/to�en please follow these 6 steps.
Step 1. Switch off the power to the SR3
Step 2. Set the 6 wa� DIL switch to the relevant coin to be
programmed.
(see �ABLE 1 and �ABLE 2).
Step 3. Switch on the power to the SR3.
Step 4. Press the re�ect lever within 20 seconds. (�he LED will turn
RED.)
Step 5. Start entering the coins or to�ens �ou wish to teach until the
LED flashes
GREEN, t�picall� after 8 to 10 insertions.
If the LED turns GREEN after the first coin is inserted, then �each and Run is
DISABLED.
Step 6. Press the re�ect lever and the LED will return to constant
GREEN.
�he coin channel is now programmed.
�o prgramme further coin channels, repeat process from step 1.
Once �ou have finished programming, return all switches to the OFF
position.
�he firts coin inserted after �each & Run ma� re�ect. Subsequent coin
should then be
accepted.
12-4 SR3 TEACH & RUN OPTION INFORMATION