Sega SHOOT THIS WIN THIS Service Manual Download Page 67

Page: 67 / 93

LAMP

REPLACEMENT

FLUORESCENT LAMP REPLACEMENT

• When working with the product, be sure to turn the power off. Working with the

power on may cause an electric shock or short circuit.

• There is danger that hot lamps can cause burns. Exercise due caution when

replacing lamps.

• Use lamps of the specified ratings. Using lamps with different ratings may cause

fires or damage.

• Such things as deteriorated insulation in lighting fixtures can cause a short circuit

and/or smoke. Make sure there are no abnormalities. For example, check if you can

smell anything burning, if any sockets have been discolored and if the lamp has to

be replaced frequently.

Be careful when handling parts made of plastic or glass. For example, be careful not

to tighten screws excessively. If such parts are damaged, injuries could be caused by

fragments, cracks, etc.

Summary of Contents for SHOOT THIS WIN THIS






























































































Search results

Summary of Contents for SHOOT THIS WIN THIS

Reviews:

Related manuals for SHOOT THIS WIN THIS

Brands by name

Popular brands

Sega SHOOT THIS WIN THIS, Service Manual

Search results

Summary of Contents for SHOOT THIS WIN THIS

Reviews:

Related manuals for SHOOT THIS WIN THIS

Brands by name

Popular brands