Sega Let's Go Jungle, Owner'S Manual

Page: 50 / 167

ASSEMBLY AND INSTALLATION
45
6
FIG. 6-14b OUTPUT TEST Screen
6
Output Test
When “OUTPUT TEST” has been selected on the game test mode menu, the screen for testing lamps and
other output devices appears.
If each output device operates properly, the output device and its wiring connections are normal. (See 9-3b.)
FIG. 6-14c GUN CALIBRATION Screen
7
Calibration
Confirm that the operability of control unit do not present any hindrances to play. Calibration is adjusted
when the product is shipped from the factory but it might need to be adjusted again because of vibrations
during transport, etc.
If such things as operability are not satisfactory, select “GUN CALIBRATION” on the game test mode
menu and check and adjust settings. (See 9-3c.)
Conduct the aforesaid tests when performing routine tests each month.
OUTPUT TEST
1P GUN MOTOR OFF SENSOR ON
1P START LAMP OFF
2P GUN MOTOR OFF SENSOR ON
2P START LAMP OFF
ROOM LAMP OFF
COIN LAMP OFF
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
GUN CALIBRATION
CALIBRATION START
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON