Sega Let's Go Jungle, Owner'S Manual

Page: 21 / 167

16
ASSEMBLY AND INSTALLATION
6
● Handle molded parts with care. Excessive weight or pressure may cause them
to break and the broken pieces may cause injury.
● To perform the operation safely and accurately you must use a safe, steady
footstool or stepladder. Working without this may lead to a fall and possible
injury.
● When connecting the connectors on the DVD wire, you must carefully check
the tags on the wire to find the correct connector. Even when you have the cor-
rect connector, you must pay careful attention to the direction and angle of
insertion. Attempting to forcefully connect the incorrect connector or connect-
ing a connector at the wrong angle or facing may damage the connector and
could lead to overheating and burn related injuries.
● When attaching or removing doors or lids, be careful that your hand or finger
does not get caught in anything.
● Be very careful when handling the projector screen. The screen can be dam-
aged easily and cannot be repaired once damaged. Such damage can only
be repaired by completely replacing the screen.
● Be careful not to damage parts surfaces. In some cases, if such surfaces are
damaged, the part must be replaced; it cannot be reinforced or repaired.