Sega Let's Go Jungle, Owner'S Manual

Page: 38 / 167

ASSEMBLY AND INSTALLATION
33
6
Make sure that all the adjusters contact the floor. Otherwise the cabinet could
move, causing an accident.
The product comes with casters attached at 17 locations and adjusters at 12 locations (Fig. 6-10a).
When the installation site has been determined, have the adjusters come in direct contact with the floor. Establish a
gap of about 5 mm between the floor and the casters and adjust the unit so that it will remain level.
FIG. 6-10a Bottom View
1
Move the product to the installation site. If the product is to be installed near a wall, secure enough passage-
way space for players to access the seat. You must also secure a 50 cm space between the back wall and the
back of the cabinet for ventilation.
2
Bring the adjusters into direct contact with the floor. Use a wrench to align the height of the adjusters until
the cabinet is perfectly level.
3
After setting, turn adjuster nuts upwards to tighten them and secure adjuster heights.
FIG. 6-10b Aligning the Adjusters
10 FIXATION TO INSTALLATION SITE
ADJUSTER (6)
ADJUSTER (6)
CASTER (17)
ADJUSTER
ADJUSTER CASTER
About 5 mm
Tighten nut
upwards.