Sega Let's Go Jungle, Owner'S Manual

Page: 37 / 167

32
ASSEMBLY AND INSTALLATION
6
3
Install the fluorescent bulbs in the lamp sockets.
4
Replace the lamp acrylic and acrylic bracket.
1
Remove the acrylic bracket that holds the lamp
acrylic on the Main Cabinet ceiling in place.
There are two acrylic brackets, but only one
needs to be removed in order to remove the
lamp acrylic. Remove the four truss screws.
Once the screws are removed, the part will
come free and fall. Support it to prevent damage
or injury.
In order to reduce the risk of damage during transit, the fluorescent bulbs are
not installed in the cabinet.
Two fluorescent bulbs need to be installed. The operation on the Main Cabi -
net ceiling will be performed from below. This runs the risk of dropping and
losing screws and other parts, to be extra careful when performing the opera-
tion.
2
Remove the acrylic bracket and lamp acrylic.
FIG. 6-9a Fluorescent Bulb
FIG. 6-9b
FIG. 6-9c
FIG. 6-9d
9 INSTALLATION OF THE FLUORESCENT BULBS
TRUSS SCREW (4), black
M4x16
ACRYLIC BRACKET
FLUORESCENT BULB
LAMP ACRYLIC