[Table of Contents]
[Previous Page]
[Next Page]
VR ADJUSTMENT
WARNING!
Do not touch places other than those specified. Touching places not specified can cause an electric
shock or short circuit.
Loosen the 2 screws which secure the VR bracket in order to move the bracket.
Move the VR bracket to disengage the adjust gear mesh and move the VR shaft in a manner so that the
VR shaft cut portion faces the opposite side of the adjust gear as shown.
Have the gears meshed and tighten the two screws.
Slowly swing the controller up and down, left and right to check if the value exceeded the VR mobile
range.
After finishing adjustments, be sure to set sights on the aim set screen in the test mode.
VR REPLACEMENT
WARNING!
In order to prevent an electric shock and short circuit, be sure to turn off power before performing work
by touching the interior parts of the product.
Page 1 of 2
VR Adjustment
7/12/2005
http://www.sauservice.com/manuals/Gunblade%20Folder/GB36.html
