[Table of Contents]
[Previous Page]
[Next Page]
EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the machine
initially, or collecting cash, or when the machine does not function properly, perform checks in
accordance with this section.
The following test modes should be utilized as applicable.
Items
Description
Installation of Machine
When the machine is installed,
perform the following:
1. Check to see that each setting
is per standard setting made at the
time of shipment.
2. In the INPUT test mode, check
each SW and VR.
3. In the OUTPUT test mode,
check each of the lamps, motors,
etc.
4. In the MEMORY test mode,
check the IC's on the PC board.
Memory
Choose MEMORY test in the
MENU mode to allow the
memory test to be performed. In
this test, PROGRAM RAMs,
ROMs and IC s on the PC board
are checked.
Monthly Servicing
Monthly perform the following:
1. MEMORY test.
2. Ascertain each setting.
3. In the INPUT test mode, test
the CONTROL device.
4. In the OUTPUT test mode,
check each of the lamps.
Control System
In the INPUT test mode, check
each SW and VR.
Adjust or replace each SW or
VR.
If the problem can not be solved
yet, check the CONTROL's
moves.
Monitor
In the MONITOR
ADJUSTMENT mode, check to
Page 1 of 2
Explanation of Test and Data Display
7/12/2005
http://www.sauservice.com/manuals/Gunblade%20Folder/GB19.html
