[Table of Contents]
[Previous Page]
[Next Page]
WARNING!
Make sure that all the leg adjusters are in contact with the floor. If they are not, the cabinet can move,
causing an accident.
This machine has 8 casters and 6 leg adjusters. When the installation position has been determined,
cause the leg adjusters to come into contact with the floor, and make adjustments so that the casters are
raised approximately 5mm from the floor. Ensure that the machine is level.
Move the machine to the installation position.
Cause all of the leg adjusters to make contact with the floor. By using a wrench, make adjustments in the
height of the leg adjusters to ensure that the machine is level.
After making adjustments, fasten the leg adjuster nut upwards to secure the height of the leg adjuster.
Page 1 of 1
Leg Adjusters
7/12/2005
http://www.sauservice.com/manuals/Gunblade%20Folder/GB13.html
