– 7871 - 7872 - 7875 - 7876 –
p.
14
Press START. The appliance searches until the end of the scan and turns directly to the Measurement plan
mode. If channels were found, the appliance makes measurements continuously (C/N-level, then BER/MER)
on the detected channels. If no channel has been found, see the next chapter.
Eventually, press the TV measurement key. On this new page, press Prog, select the channel that you want
to display.
Check the level, the BER/MER, the TV detection and the spectrum of the signal on this page
…
