– 7871 - 7872 - 7875 - 7876 –
p.
46
If the appliance is not synchronized on all four transponders, the quality indication is
red
.
If the appliance is synchronized on all four transponders but the reception quality is
average, the quality indication is
orange
.
If the appliance is synchronized on all four transponders and the reception quality is good,
the quality indication is
green
.
9.3
Checking the aligned satellite
To check if you have aimed the right satellite, press the NIT key.
The appliance searches the MPEG NIT table on one of the 4 transponders and displays the name of the
satellite:
Attention:
To identify a satellite, it must be synchronized on all
4 transponders
.
However, some transponders are regularly modified.
See the frequency map of the satellite if a transponder does not seem to work.
Some switches or LNB work only with DiSEqC commands. In this case, position the OL
and the polarization on DiSEqC in the Configuration page LNB-DiSEqC.
(Attention: the Check Sat is slower with DiSEqC commands).
Attention:
The displayed name depends on the content of the MPEG NIT table.
Some distributors provide no (or poor) such table.
The displayed information may be wrong.
