– 7871 - 7872 - 7875 - 7876 –
p.
72
13.6 NIT function
Pressing gives you access to the NIT list:
This function allows the display of the « Network Information Table » of the multiplex.
The name of the network and some other helpful information are shown in this list.
13.7 ASI TS function
The input and output of the digital video signal MPEG are made according to the ASI standard
(« asynchronous serial interface »).
It is a serial asynchronous (without a clock) transmission at 270MHz on a coaxial cable to enter or exit a
digital modulator or a MPEG frame analyzer, for example.
Pressing displays the ASI input connected to the appliance (in this mode,
ASI IN
shows up blinking
red on top right of the screen).
The appliance continuously emits the displayed multiplex to the ASI OUT output.
