– 7871 - 7872 - 7875 - 7876 –
p.
45
9.2
Check Sat function
Procedure:
1/ Connect the satellite dish to the appliance and start it up.
2/ Validate the remote power supply:
-
VDC lights up.
-
Check the power supply current of the LNB (IDC at the top right corner of the screen should be
between ca. 50 and 200 mA).
3/ On the Home page, go to the Check Sat mode.
Select the satellite to aim at in the list (example ASTRA1)
4/ Slowly orientate the satellite dish until hearing the locking melody and getting the best quality.
5/ Slightly turn the LNB to get the best quality (counter-polarization).
You will hear a melody as soon as a first transponder is detected; then, you will hear beeps. These beeps
are closer and closer as the quality increases.
