SEFRAM 7871, User Manual

Page: 52 / 126

– 7871 - 7872 - 7875 - 7876 –
p.
52
11.2 Modification of parameters
You can either do measures on a saved setup in the current list (see chapter « Setting the parameters of the
Measurement Lists »), or modify manually each parameter.
The various parameters are:

The name of the setup (selection on the active list)

The frequency of the emitter or transponder (and the true frequency of satellite)

The standard and bandwidth for DVB-T/H and DVB-T2

The corresponding channel number for terrestrial and cable mode

The symbol rate for the satellite

The polarization and the band for the satellite

The audio mode for the analogical TV
The + key in the lower right corner displays (under DVB-T/H, DVB-T2, DVB-S and DVB-S2) the following
information:


The spectral inversion of the signal

The frequency offset

The Viterbi rate of the HP flow

The Viterbi rate of the LP flow

The level of the hierarchical mode

The cell identification
See chapter Man-machine interface to make any change.
You can shift from terrestrial to satellite mode by:
- Changing the setup frequency
- Changing of standard
- Changing of setup (from a terrestrial to a satellite setup)