DropLit Assembly Guide
Cut those two wires flush with the back of the connector and “un-route” them from the harness
and pull them free so you can work with them. The idea here is to leave the unused wiring wrapped up
as it is in order to make it stay compact and all one bundle once the power supply is installed.
Next, strip about 1/4” of insulation from those two
wires and crimp on the spade lug connectors that will
eventually attach to the power switch.
Now locate one of the square connectors
that's got two black & two yellow wires connected to it. They may be clipped together – it doesn't
matter as you'll just clip them flush and extract them the same way you did with the power switch
wires.
57
Fig. 6-10: Power switch wires extracted.
Fig. 6-11: Spade connectors crimped in
place.
Fig. 6-12: Handy source of 2 black & 2
yellow.
Fig. 6-13: Wires freed up for use.
