DropLit Assembly Guide
The feet for the DropLit are installed by inserting a
nylon screw through the foot cup and then putting the
screw through the mounting hole on the under side of the
power supply base plate.
Please make sure that you've got the power
supply base plate oriented as I show in Fig. 4-
10, otherwise you're going to have a bad time.
26
Fig. 4-6: PS base and foot parts.
Fig. 4-7: Foot cup & screw.
Fig. 4-8: Ready for nut!
Fig. 4-9: Nut installed!
Fig. 4-10: All four foot cups installed.