DropLit Assembly Guide
6 – Things Electronic!
This chapter will cover the remaining electronic components of the DropLit.
Installing the Limit Switch
First, let's get the limit switch installed. For this task, you'll need the following components:
We need to start by soldering a pair of wires to the limit switch as shown below.
It doesn't really matter what color goes to what
post, but make sure you're using the outer posts as shown in
Fig. 6-1.
Now thread the leads up through the rectangular
opening on the motor mount.
53
Three Wire Ties
Fig. 6-1: Leads attached.
Fig. 6-2: Route through the motor
mount...
