Security Tronix ST-HDoC User Manual Download Page 38

Page: 38 / 45

ST-HDoC / ST-HDoC-MM

3.5 Audio input test

Test the audio input from pickup devices. Connect the tester and audio source using the supplied cable.

NOTE: Please check your local laws governing the use of audio recording/monitoring equipment.

3.6 LED lamp

The ST-HDoC is equipped with an on board LED flashlight located on the top of the unit.

Turn on the tester, press for several seconds, and the LED lamp will turn on, press again

to turn off the lamp.

、

Specifications

4.1 General Specifications

Model

ST-HDoC / ST-HDoC-MM

Video Test

Signal mode

NTSC/PAL (Auto adaptive)

Display

3.5 inch HVGA TFT-LCD, 480

（

RGB

）

x 320 resolution

LCD adjustment

Brightness, Contrast, Saturation adjustable

Video IN/OUT

1 channel BNC Input & 1 channel BNC Output

Video Output Mode

1.0 Vp-p

Video Signal Test

Video signal test

Video signals measured in IRE or mV

Summary of Contents for ST-HDoC














































Search results

Summary of Contents for ST-HDoC

Reviews:

Related manuals for ST-HDoC

Brands by name

Popular brands

Security Tronix ST-HDoC, User Manual

Search results

Summary of Contents for ST-HDoC

Reviews:

Related manuals for ST-HDoC

Brands by name

Popular brands