ST-HDoC / ST-HDoC-MM
14
Press the
key to switch between menu pages, the square
icon at the bottom
of the screen indicates the different pages of apps available.
Press the key
to select the different function icon, then press the key
to enter
First page menu
Second page menu
3.3.1 PTZ controller
Connect an analog PTZ camera to the tester, and open the PTZ controller app. From this menu, you
can view the video stream as well as control PTZ movements. From within the PTZ app, you can also
configure parameters such as: Protocol, Baud Rate, Address,
Pan/Tilt speed, Preset call and recall.
PTZ controller parameter settings
In the “PTZ CONTROLLER ” app
（
as shown in above photo
）
, press the
key to enter the
parameter settings .
Press the key
, to move the yellow cursor to select a parameter.
Press the key
or
, to change the parameter values. Then press the
key to save and
return.
