45
Please refer to the following sheet for detailed information.
Parameter
Function
Address
It is to set the corresponding speed dome address. The default
setup is 0.
Baud rate
It is to set the baud rate of the camera. The default setup is
38400.
Data bit
The default setup is 8.
Stop bit
The default setup is 1.
Parity
You can set protocol parity mode. The default setup is none.
3.3.2 Function
In this part, you can operate the PTZ of the camera and control PTZ movement.
Parameter
Function
Preset
Set camera preset.
Tour
Set camera tour. Max 8 tours.
Scan
Set camera scan.
Pattern
Set camera pattern.
Pan
Set camera rotation speed.
Privacy
mask
Set camera privacy mask zone.
PTZ speed
Set PTZ movement speed.
Idle motion
Set camera idle operation.
Power up
Set camera operation when system boots up.
PTZ restart
Restart camera PTZ.
Default
Restore camera PTZ default setup.
3.3.2.1
Preset
Preset interface is shown as in Figure 3-32.
