34
3.2.3 PPPoE
The PPPoE interface is shown as in Figure 3-19.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from
the IP address column.
PPPoE is set to connect to the internet. You can get an account from your IPS (Internet service
provider), you can set here to dial to the interface. You can see the registered IP address in the
interface if your setup is right.
Please note, you need to go to the IP address item to view the device current device information.
You can access the client-end via this address.
Figure 3-19
3.2.4 DDNS
The DDNS interface is shown as in Figure 3-20.
The DDNS is to set to connect the various servers so that you can access the system via the server.
Please go to the corresponding service website to apply a domain name and then access the system
via the domain. It works even your IP address has changes.
