64
Parameter Function
Send
email
If you enable this function, system can send out email to alarm the
specified user.
3.6
Storage
3.6.1 Record schedule and snapshot schedule/Holiday
In these two interfaces, you can add or remove the schedule record/snapshot setup. See Figure 3-55.
There are three record modes: general (auto), motion detect and alarm. There are six periods in one
day. Please make sure you have enabled the corresponding record mode in the Setup->Storage-
>Conditions.
You can view the current time period setup from the color bar.
Green color stands for the general record/snapshot.
Yellow color stands for the motion detect record/snapshot.
Red color stands for the alarm record/snapshot.
In the holiday schedule interface, you can set special dates as holiday. Once you enable
record/snapshot function here, system can record/snapshot according to your setup on the holiday
schedule interface.
Figure 3-55
3.6.2 Destination
The destination interface is shown as in Figure 3-56.
It is to set the storage mode of the speed dome record file or snapshot pictures. There are three options:
path/local storage/FTP. You can only select one mode. System can save according to the event types.
It is corresponding to the three modes (general/motion/alarm) in the Schedule interface. Please check
the box to enable the save functions.
