Secure Computing SSL Scanner, User Manual

Page: 190 / 191

SSL Scanner
Using this section, you can inspect and manage incidents relating to SSL-en-
crypted communication.
The Incident Manager enables you to retrieve
incident.dat
files from Web-
washer instances. It synchronizes and displays them, adding hosts or certifi-
cates to the policy-dependent or independent (global) certificate list.e
Note that an
incident.dat
file will only be written if you have configured an
Allow & Log Incident
or
Block & Log Incident
action or a user defined
action that leads to writing a log file.
You can view and edit the incidents list on the
Incident Management
page.
It is opened with or without a refresh by clicking on one of the following buttons:
or:
For a description of this page, see the next section.
Incident Management
Using the
Incident Management
page, you can inspect SSL incidents and
add them either to the policy-dependent or independent (global) certificate list.
On this page, a table is provided listing all incidents that occurred after the last
refresh of this list was performed. All of them have not yet been processed.
To perform a refresh, click on the
Refresh Incident List
button, which is lo-
cated above the left side of the table:
This will process the stored incidents and add them to the list.
If Webwasher is running in a cluster, a refresh will lead to a synchronization
with the subscribed sites. Depending on the sites load, the refresh may take
a moment.
The list will be cross-checked with the policy-dependent and independent cer-
tificate lists to avoid multiple entries.
4–30