Secure Computing SSL Scanner, User Manual

Page: 48 / 191

Home
E-mails can be sent manually, however, using the
Queue Management
page, which is launched after clicking on the
See Content of Queue
link
next to the drop-down list.
On this page, click on the button labeled
Send All to SecureLabs
now to
send the e-mails.
•
E-mail address
In this input field, enter an e-mail address. All e-mails received by Web-
washer containing this address will be moved to the queue specified above.
The default address is
FalseNegativesFeedback@WillBeCaughtBy-
Webwasher.com
.
Malware Feedback Queue
The
Malware Feedback Queue
section looks like this:
Using this section, you can configure the sending of feedback in order to im-
prove the malware filter.
An e-mail that was classified as spam and contains an attachment where no
virus was found, will be copied to the malware queue and later be sent to Se-
cure Computing. Small downloads will also be copied to this queue if at least
one of the Anti Virus engines or the Proactive Scanning filter detected a virus,
but not all engines came to the same result.
This feature is not enabled by default. If you would like to help improve the
malware filter, please mark the checkbox next to the section heading.
After specifying this setting and other settings in this section, click on
Apply
Changes
to make these settings effective.
Use the following items to configure the malware feedback:
•
SMTP queue to use
From this drop-down list, select an e-mail queue. E-mails and small down-
loads matching the criteria explained above will be moved to this queue as
malware and later be sent to Secure Computing.
2–28