Secure Computing SSL Scanner, User Manual

Page: 46 / 191

Home
E-mails that were released from a queue after receiving a digest e-mail will be
copied to the false positives queue and sent from there to Secure Computing.
This feature is not enabled by default. If you would like to help improve the
spam filter, please mark the checkbox next to the section heading.
After specifying this setting and other settings in this section, click on
Apply
Changes
to make these settings effective.
Use the following items to configure the false positives feedback:
•
SMTP queue to use
From this drop-down list, select an e-mail queue. After being released
from another queue, e-mails will be copied to this queue and later be sent
to Secure Computing.
The queue should be used for no other purpose than that of collecting false
positives since it will be cleared after e-mails have been sent off.
To see the e-mails that are in this queue, click on the
See Content of
Queue
link next to the drop-down list.
•
Send interval in . . . minutes
In the input field provided here, enter a time interval (in minutes) to specify
the time that is to elapse between sending e-mails.
The default interval is 240 minutes. Entering 0 here means that no e-mails
will be sent automatically.
E-mails can be sent manually, however, using the
Queue Management
page, which is launched after clicking on the
See Content of Queue
link
next to the drop-down list.
On this page, click on the button labeled
Send All to SecureLabs now
to send the e-mails.
•
E-mail address
In this input field, enter an e-mail address. All e-mails received by Web-
washer containing this address will be moved to the queue specified above.
The default address is
FalseNegativesFeedback@WillBeCaughtBy-
Webwasher.com
.
2–26