Secure Computing SSL Scanner, User Manual

Page: 47 / 191

Home
Spam False Negatives Feedback Queue
The
Spam False Negatives Feedback Queue
section looks like this:
Using this section, you can configure the sending of feedback in order to im-
prove the spam filter.
You can send e-mails that have erroneously not been classified as spam to an
address that is configured in this section. After e-mails with this address have
been received in the inbound queue of your Webwasher instance, they will be
moved from there to the false negatives queue and later be sent to Secure
Computing.
This feature is not enabled by default. If you would like to help improve the
spam filter, please mark the checkbox next to the section heading.
After specifying this setting and other settings of this section, click on
Apply
Changes
to make these settings effective.
Use the following items to configure the false negatives feedback:
•
SMTP queue to use
From this drop-down list, select an e-mail queue. After being received
in the inbound queue, an e-mail with the address specified further below
will be moved to this queue as false negative and later be sent to Secure
Computing.
The queue should be used for no other purpose than that of collecting false
negatives since it will be cleared after e-mails have been sent off.
To see the e-mails that are in this queue, click on the
See Content of
Queue
link next to the drop-down list.
•
Send interval in . . . minutes
In the input field provided here, enter a time interval (in minutes) to specify
the time that is to elapse between sending e-mails.
The default interval is 240 minutes. Entering 0 here means that no e-mails
will be sent automatically.
2–27