ProLogic L02-C
Operation Instructions
21
The ProLogic L02-C is capable of managing 4 locks. A CB11-1T4 is required to operate 4 locks with the
ProLogic L02-C EntryPad. In order to manage more than one lock, you need to tell the system how many
locks are connected, and then identify the locks with a number. Users can then be assigned access
rights to open specific locks.
8.2 Set Number of Locks
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Set Number of Locks” and Press OK.
Step 5: The system will prompt you to enter the Manufacturing Setup Code.
Enter 975246 and press OK.
Step 6: Press the
and
to specify the number of lock to be controlled; and press OK.
8.3 Authorize Locks
In this programming step, you can specify or “authorize” which Users will have to each of the locks.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
