ProLogic L02-C
Operation Instructions
19
Step 5: Now using the
and
buttons, specify which User ID will define Group A and press OK.
If you specify that this number is 00, the feature will be disabled and normal Dual Mode rules
will apply – two valid code to open the lock; Manager Codes are Dual Mode Overide Codes.
If you specify that this number is 01, any Code from 02-30 must be used in conjunction with the
Manager Code ID01; and ID01 and ID02 are no longer a Dual Mode Overide Codes.
7.0 Manager Mode
Manager Mode is a function that allows you to toggle off/on User Codes by the entry of the Manager
Code ID01 or ID02. This allows you to disable all the user codes. Manager Mode is used when you want
to have the Users have the ability to open the safe during certain periods of time, perhaps when the
store is open. And then at other times, the Users would not be able to open the safe, perhaps during
the closed hours.
When this mode is enabled, the Manager Codes ID01 and ID02 are not used to open the safe. When
entered these codes alternately toggle on/off the User Codes.
For example, the User codes have been enabled all day, but now the Manager is closing the store
for the night. The Manager enters the ID01 or ID02 code - this action does not open the safe but
instead it toggles off (disables) all User Codes - ID03-30. ID03-30 can no longer open the safe using
their codes.
The next business day, the Manager opens the store. The Manager enters the ID01 or ID02 code.
Again this action does not open the safe but it does toggle on (enables) all User Codes ID03-30.
ID03-30 can now open the safe using their codes.
Manager Mode offers a simple TimeLocking method.
7.1 Enable Manager Mode:
This menu selection allows you to set the Manager Mode as described above.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00).
This function is not available in the menu accessed by the Manager Code (ID01). The “Select
Menu” message will be displayed as follows:
