ProLogic L02-C
Operation Instructions
20
Step 4: Scroll
to the menu selection “Enable Manager” and Press OK.
Manager Mode is now enabled.
In this Mode:
ID01 Code cannot open the safe and is used to toggle on/off all User codes. ID01 still has all its
programming functions.
ID02 Code cannot open the safe and is used to toggle on/off all User codes. ID02 managerial
programming functions have been disabled.
7.2 Disable Manager Mode:
This menu selection allows you to set the Manager Mode as described above.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00).
This function is not available in the menu accessed by the Manager Code (ID01). The “Select
Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Disable Manager” and Press OK.
Manager Mode is now disabled. ID01 and ID02 functionality has been restored to original.
8.0 Door Management
8.1 Configuring a Multi-Lock system
