ProLogic L02-C
Operation Instructions
17
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Set TDO Users” and Press OK.
Step 5: Scroll
and
to select the User ID numbers that you would like to be Time Delay
Override Users.
Step 6: Press OK.
By default, ID02 is selected as TDO.
When TDO is set to any ID# other than 00 or 01, then ID00, ID01 and the set ID number will have
TDO authority.
When TDO is set to ID01, only ID00 and ID01 have TDO authority.
When TDO is set to ID00, only ID00 has TDO authority.
6.0 Single or Dual Control
The ProLogic L02-C has the ability to operate in either Single Control mode or Dual Control Mode:
Single Control Mode: One valid code will open the safe lock system.
Dual Control Mode: Two valid codes must be entered to open the safe lock system.
The ProLogic L02-C comes pre-programmed in Single Control Mode.
6.1 Enable Dual Mode
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
