Q7-B03
Q7-B03 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
56
4.3.13
USB configuration submenu
4.3.14
Platform Trust technology submenu
Menu Item
Options
Description
Legacy USB Support
Enabled / Disabled /
Auto
Enables Legacy USB Support. AUTO Option disables legacy support if no USB devices are connected.
DISABLE option will keep USB devices available only for EFI applications.
XHCI hand-off
Enabled/ Disabled
This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be
claimed by XHCI driver.
USB Mass Storage Driver Support
Enabled/ Disabled
Enables or disables USB Mass Storage Driver Support
USB Transfer time-out
1 sec / 5 sec / 10 sec /
20 sec
Sets the time-out value for Control, Bulk and Interrupt transfers
Device reset time-out
10 sec / 20 sec / 30
sec / 40 sec
USB mass storage device Start Unit command time-out
Device power-up delay
Auto / Manual
Sets the maximum time that the device will take before it properly reports itself to the Host controller. 'Auto'
uses the default vale (for a Root port it is 100ms, for a Hub port the delay is taken from the Hub descriptor).
Device power-up delay in seconds
[1..40]
Delay range in seconds, in one second increment
Menu Item
Options
Description
fTPM
Enabled / Disabled
Enable/Disable fTPM
