Q7-B03
Q7-B03 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
54
4.3.11
LVDS Configuration submenu
Menu Item
Options
Description
LVDS interface
Enabled / Disabled
Enables or Disables the LVDS interface. When enabled all the following parameters will appear
Edid Mode
External / Default / Custom
Select the source (EDID, Extended Display Identification Data) to be used for the internal flat panel.
Depending on the setting chosen, only some of the following option or none will appear.
EDID
640x480 / 800x480 / 800x600
/ 1024x600 / 1024x768 /
1280x720 / 1280x800 /
1280x1024 / 1366x768 /
1400x900 / 1600x900 /
1680x1050 / 1920x1080
Select a software resolution (EDID settings) to be used
for the internal flat panel.
Pixel Clock / 10000
[2500..22400]
Working Frequency in 10kHz units, e.g 6350
63.5MHz. Allowed range from 2500 (25MHz) to 22400
(224MHz)
Horizontal Active
[1..4095]
Horizontal Addressable Video in pixels, a.k.a. Horizontal resolution (e.g. 1024 on a 1024x768 LFP)
Horizontal Blank
[1..4095]
Horizontal Blanking in pixels, equals to Horizontal Total (Horizontal Horizontal Front Porch +
Horizontal Black Porch)
Vertical Active
[1..4095]
Vertical Addressable Video in pixels, a.k.a. Vertical resolution (e.g. 768 on a 1024x768 LFP)
Vertical Blank
[1..4095]
Vertical Blanking in pixels, equals to Vertical Total (Vertical Vertical Front Porch + Vertical Black
Porch)
Horizontal Offset
[1..1023]
Horizontal Front Porch in pixels
Horizontal Pulse
[1..1023]
Horizontal Sync Pulse Width in pixels
Vertical Offset
[1..63]
Vertical Front Porch in pixels
Vertical Pulse
[1..63]
Vertical Sync Pulse Width in pixels
Horizontal Polarity
Negative / Positive
Sync Signal Polarity: Default is Negative (Active Low)
Vertical Polarity
Negative / Positive
Sync Signal Polarity: Default is Negative (Active Low)
Color Mode
VESA 24bpp / JEIDA 24bpp /
18 bpp
Select the color depth of LVDS interface. For 24-bit color depth, it is possible to choose also the color
mapping on LVDS channels, i.e. if it must be VESA-compatible or JEIDA compatible.
Interface
Single Channel / Dual Channel
Allows configuration of LVDS interface in Single or Dual channel mode
LVDS Advanced Options
See Submenu
LVDS Advanced Options Configurations
