ENFORCER SLI 820R/-4
Tech Manual
Page 5
Alarm outputs
Siren:
+12VDC, 2A
Parking lights: Relay rated at 10A max.
Starter disable: 500mA transistor ground.
LED output:
15mA
Door lock:
200mA transistor ground,
with ignition lock.
Door unlock:
200mA transistor ground,
with ignition, unlock and
double-pulse unlock.
Channel 2:
200mA transistor ground.
Domelight:
200mA transistor ground.
Horn:
200mA transistor ground.
Transmitter/receiver
Modulation:
AM
Impedance:
50 ohm
Frequency:
315MHz ( For SLI 820R ,
SLI820RTC & SLI 820 RTF)
433.92MHz ( For SLI 820R-4 ,
SLI820RTC-4 & SLI 820FTC-4 )
Digital coding: Over 68 billion possible codes
for SLI 820RTF/RTF-4
Over 18 quintillion possible
codes for SLI 820RTC/RTC-4
Power (xmttr): +12VDC battery
Alarm inputs
N.O. negative for door
N.O. positive for door
N.O. negative for hood/trunk
N.O. negative for aux. sensor trigger
N.O. negative for aux. sensor pre-alert
Ignition switch sensing
Current sensing
General
Power:
+12VDC
Current drain:
Under 10mA (disarmed)
Under 30mA (armed, LED
flashing)
Exit delay:
30 seconds (passive arming)
Entry delay:
None
Alarm duration: 30-second cycle,
max. 3 cycles
MODEL NO. REFERENCE
l
SLI 820A Excludes RF transmitter/receiver
(optional).
l
SLI 820R & SLI 820R-4 Excludes RF
transmitter (optional).
l
SLI 820RTF & SLI 820RTF-4 Includes 2 RF
fixed code transmitters.
l
SLI 820RTC & SLI 820RTC-4 Includes 2
RF code hopping transmitters.
SPECIFICATIONS
The alarms main brain, which controls all the
alarms functions, is very sophisticated, and care
must be taken when mounting. Note:
A. DO NOT MOUNT THE ALARM BRAIN UNTIL
ALL CONNECTIONS HAVE BEEN MADE
AND THOROUGHLY TESTED.
B. Do not mount the alarm brain where it is
exposed to extreme heat or moisture. DO
NOT MOUNT IT IN THE ENGINE
COMPARTMENT.
MOUNTING THE ALARM BRAIN
C. Mount the alarm brain out-of-sight under
the dashboard. Securely tie-wrap it in place
so it cannot be easily reached by thieves or
disconnected by accident.
D. Make sure the alarm brain does not disrupt
the normal operation of any moving parts
under the dash.
E. Do not mount in front of the heater,
defroster, or air conditioning ducts.
